The unit of viscosity is Centistoke. Popular fuels having a viscosity in accordance with ISO 8217 standards based on D6 are as follows: * IFO 380 - intermediate diesel fuel d6 with a maximum viscosity of 380 Centistokes * IFO 180 - intermediate diesel fuel d6 with a maximum viscosity of 180 Centistokes * LS 380 - low sulfur fuel oil (<1.5%) of intermediate d6 with a maximum viscosity of 380 Centistokes * LS 180 - low-sulfur (<1.5%) intermediate diesel fuel d6 with a maximum viscosity of 180 Centistokes * MDO - marine diesel oil. * MGO - marine gas oil.
LNG is a colorless, odorless substance with a density of 0.41-0.5 kg / l. It is influenced by alkanes (it is 0.41kg / l),. Non-toxic.
The boiling point is –158 ... –163 ° C. Modern LNG consists of 85-95% methane, and the remaining 5% consists of ethane, propane, butane, and nitrogen. The lower limit of heat of combustion is 50.116 kJ / kg, or 20 MJ / l. During the processing of sulfuric acid carbon dioxide, etc.
EN 590 is a standard according to the European Committee for Standardization, which lists the physical properties of diesel fuel intended for vehicles in the case of sales in the European Union and other European regions.
Our company offers supplies of road bitumen of various categories practically throughout the entire Kazakhstan Republic. Constantly increasing requirements for road surface, as well as requirements related to the increase in its service life are one of the main requirements for the quality of bitumen today.
Mazut is a set of hydrocarbons (with a molecular weight of from 400 to 1000), petroleum resins (with a molecular weight of 500-3000 or more), asphaltenes, carbenes, carboids and organic compounds containing metals (V, Ni, Fe, Mg, Na , Ca).
Jet fuel is kerosene, not a distillate, such as Gasoil / Diesel. At the refinery, it is separated from gasoline and paraffin. Jet A-1 is widely used as the main fuel worldwide. The difference of this fuel from the Russian analogue TS-1 is in thermo-oxidative stability, which, in turn, is related to the content of mercaptan sulfur in raw materials.